1.3.12. The salon equipment

Fig. 1.94. A coaster

For opening press a cover of a coaster with a symbol (fig. 1.94).

For coaster installation in a starting position push it completely back till the fixing moment.

ATTENTION During movement of the car do not put in a coaster hot drinks. The hot drink can spill and cause burns. Do not use firm glasses for drink (for example, from glass, porcelain). At failure they can break.

Fig. 1.95. A forward dividing armrest

Fig. 1.96. Coasters in an armrest

Press the button.

In a forward dividing armrest it is possible to place a maximum two drinks.

For opening of coasters press a symbol And (fig. 1.97).

Fig. 1.97. Coasters in a back dividing armrest

For installation of the corresponding holder In deblock its pressing in a direction of an arrow and simultaneously adjust position.

Adjust position of the holder that it densely adjoined to a drink.

In dividing подлокотние it is possible to place a maximum two drinks.

For opening press a forward lath of an ashtray And (fig. 1.98).

Fig. 1.98. An ashtray in the central console

Take a plug-in element In for lateral deepenings and take it upwards.

Establish a plug-in element in a nest pressing.

For ashtray opening – open a cover.

Fig. 1.99. A back ashtray

Take the case for an open cover and take upwards (fig. 1.99).

Open a cover of a plug-in element and to press a plug-in element against the stop in a nest.

Located in a nest cigarette Lighter the socket on 12 volt can use for connection of additional electrodevices.

lighter joins утапливанием a cartridge.

Wait cartridge pushing out.

After that at once take прикуриватель from a nest.

Light a cigarette from the heated heating spiral cigarette Lighter.

Establish прикуриватель in a nest.

Take прикуриватель.

Establish the electrodevice tip in a nest cigarette Lighter.

Fig. 1.100. lighter the central console

Located in a nest cigarette Lighter the usual socket on 12 volt can use for connection of additional electrodevices with power consumption no more than 100 watt (fig. 1.100).

ATTENTION Be cautious at using прикуривателем. Inattentive or uncontrolled using прикуривателем is fraught with danger of burns.

lighter works and at the switched off ignition, i.e. and after extraction of the ignition key from the lock.

Electrosockets and by that the connected electrodevices work and at the switched off ignition, i.e. and after extraction of the ignition key from the lock. Use only suitable tips not to damage the socket.

The socket on 12 volt can use for connection of additional electrodevices.

Fig. 1.101. The socket on 12 volt located in a luggage carrier

Take away upwards a socket cover (fig. 1.101).

Establish the electrodevice tip in the socket.

The socket on 12 volt can use for connection of additional electrodevices with power consumption no more than 100 watt.

The ware box can be locked. At an open cover box illumination joins.

Fig. 1.102. A ware box

Pull the handle located in a cover in a direction of an arrow and open a cover downwards (fig. 1.102).

Close a cover that it was fixed.

Illumination of a ware box joins at opening of a cover and the included headlights / lay fires.

In a cover of a ware box there are clamps for fastening of writing-materials.

Fig. 1.103. A case of the central console

For opening press a cover (fig. 1.103).

For closing push a case completely back till the fixing moment.

In the central console near to a manual brake there is one more compartment. On cars with navigation system on a place of the given compartment controls are located by system.

Fig. 1.104. A niche for storage of a folder with documents under a steering wheel

It is convenient to store documents and some small subjects in this niche (fig. 1.104).

Fig. 1.105. A niche doors

In internal facing of doors niches (fig. 1.105) also are located.

ATTENTION In niches of facing of doors store only the small subjects which are not acting from a niche. Otherwise the operative range of lateral pillows of safety is limited.

Over each of back doors the hook for clothes is located.

Fig. 1.106. A hanger of a back door

ATTENTION At using hangers watch, that the clothes did not break the back review.

Hang up only easy clothes. In pockets there should not be heavy and acute-angled subjects.

For the purpose of maintenance of protective function of head pillows of safety use of hangers-coat hanger for clothes is not supposed.

Audiocassettes can are stored (without cases) in the sliding compartments cleaned in a niche intended for them.

Fig. 1.107. A niche for cartridges of the central console

For compartment opening press the button (fig. 1.107).

The cartridge is put in a compartment by the open party upwards.

For closing push a compartment completely back till the fixing moment.

At a cartridge finding in a compartment on the left side of a compartment there is a red label.

Blocking of coils prevents spontaneous unwinding of a tape and by that its deformation.

Fig. 1.108. The face party of a forward seat with the put forward box

From the face party of each of forward seats there is a sliding ware box (fig. 1.108).

For box opening raise the handle and put forward it.

For closing completely insert a box till the moment of its fixing.

THE NOTE The maximum loading of a box makes 1 kg.

For fastening of subjects of luggage in a luggage carrier there are four lifting loops.

Fig. 1.109. An arrangement of lifting loops of a luggage carrier

By means of lifting loops it is possible to fix cargo (fig. 1.109).

The grid interferes with displacement of easy cargo in a luggage carrier and can be used also in quality укладочной grids.

Fig. 1.110. Tense грузоудерживающая a grid

Fix a grid for four lifting loops (fig. 1.110).

Fig. 1.111. Suspended for hooks грузо a keeping grid

To pass hooks укладочной grids in the lifting loops located in the bottom of a back of a luggage carrier (fig. 1.111).

By means of a plate take away downwards located in the top part of a luggage carrier fixing hooks And, pull a grid upwards and fix loops грузоудерживающей grids for hooks (fig. 1.111).

Hooks can be used also for suspension of bags, packages etc.

If hooks are not used, they come back independently in a starting position.

ATTENTION The ukladochnaja grid is calculated on subjects in weight no more than 5 kg. The grid does not provide reliable fastening of heavier subjects.

Fig. 1.112. The straightened sheeting in a luggage carrier

At transportation of the polluted subjects follows use a sheeting (fig. 1.112).

Fig. 1.113. The Sheeting of the combined back of a back seat

For increase in the sizes of a luggage carrier it is possible to put forward both components of a back together or separately.

Wring out in an arrow direction unlocking handle And

Fig. 1.114. The unlocking handle

(Fig. 1.114).

Combine a back forward.

Take away a back back till the moment of its reliable fixing of V.Pri of correct fixing of a back red marks of a pin should not be visible.

Fig. 1.115. Lock-out of a back of a seat

Turn to the right inserted into the lock of the unlocking handle (fig. 1.115).

Turn to the left inserted into the lock of the unlocking handle a key.

Correctly fixed back of a back seat (normal position) can be locked and unlocked only the basic or emergency key (the lock is in the unlocking handle). Thanks to it undesirable penetration into a luggage carrier from car salon is prevented.

ATTENTION The back should be reliably latched on a clamp for maintenance of protective action of a belt of an average seat. The back should be reliably latched on a clamp that at sudden braking there was no displacement forward subjects being in a luggage carrier. At back returning in a starting position watch, that seat belts of lateral seats were in лентонаправляющем a trench. Otherwise belts can get to the back lock that can lead to their damage.

The ware shelf behind a back of a back seat can использваться for easy subjects of clothes.

ATTENTION On a ware shelf do not put heavy or firm subjects. At sharp braking they can injure people being in the car. Remember that subjects rubbing about back glass can damage system of its electroheating.

THE NOTE For maintenance of normal air exchange do not cover with things the exhaust cracks which are on a joint of back glass and a ware shelf.